Innovacera 230V 200W Aluminum Oxide Alumina Ceramic Pellet Igniter for Biomass Burner

Product Description

Product Description

Alumina Ceramic Pellet Igniter consist of Al2O3 insulation ceramics with an integrated W conductor, and reach a permanent operation temperature of between 900°C and 1100°C.

  

Usage	ignition
Working Voltage	120V, 230VAC
Power	160W 180W 210W 225W 230W 240W 255W 300W 350W
Dimension of product	Existing Sample: 78*Φ10.5*φ 6.5 m m, OD10.5*ID6.2*90MM, OD11.5*ID6.5*108MM
	Holder Size: D17.5*35MM,OD24 * 45MM / OD25 * 35MM
	Customized sample is acceptable
Lead wire:	300mm / 400mm / 500mm / 900mm (Customized is accept)
Electrode	Welding leads on the electrode
Advantages	> Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket
	> Air can flow through and around inside and outside of heater
	> Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C
	> Lifetime up to 100,000 heating cycles, depending on operating conditions
	> Oxidation and corrosion-resistant
	> Ignition through air heating: Due to extremely high heater temperature and ideal     geometric conditions, air is heated in a very short time to very high temperatures
	- the ideal ignition blower!
	> Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible.

 

Pellet Igniter Supplier Advantages:

1.Higher temperature, about twice of traditional metal sheathed heater;
2.Shorter ignition:time, about 60~90 seconds
3.Electrically insulated with no exposed electric contacts
4.Wear and corrosion resistance
5.Long life time
6.Easy to install and replace

Ceramic Igniter Concrete applications:

* Hot surface igniters (ignition of gas, oil, biomass, pellets)
* Hot air generation
* Tool heating
* Melting/Welting/Soldering/Hot air soldering
* Heaters for chemical analysis and laboratory equipment (eg: min-furnaces, reactors)
* Customer-specific heating solutions

Alumina Ceramic Heater Configuration and Dimensions
Configuration	Dimension (mm)
Tube/Rod	Diameter/Length/width	Tolerance	Thickness	Tolerance
	D:2.5~12 L:10~120	D:Above8+0.3,Below8+0.2 L:Above80+2.0,Below80+1.0
Square Plate	L: 10~100 W: 5-50	Above:70 +2 Below:70+1	0.5~2	±0.1
Round plate	D:10~70	Above:30 +2 Below:30+1	0.5~2	±0.1

Please note that the above data only can be your reference.Different Structure would difference.(Especialy for the tolerance.
Alumina Ceramic Heater Design Structure

Ceramic Heaters are manufactured by printing resistors on alumina shees,being laminated and sintered into
one pieces.

* Types:
Rectangular alumina ceramic heating element
Round shape alumina ceramic heating element
Rod shape alumina ceramic heating element

Tube shape alumina ceramic heating element
 

Application

 

Thermal Properties for Alumina Heater
Item	Unit	Value
Vickers Hardness	Gpa	11.5
Flexural Strength	Mpa	300
Compressive Strength	Mpa	2000
Modulus of Elasticity	Gpa	300
Poisson's Ratio	---	0.22-0.23
Fracture Toughness	Mpam ^1/2	3.5-4.0
Thermal Conductivity	W/(m·k)	25
Thermal Expansion Coefficient	10 ^-6/	6.5-7.5
Thermal Shock Resistance	△T	200
Maximum Use Temperature		1600
Dielectric Strength	KV/mm	>12
Dielectric Constant	εr	9-10
Dielectric Loss Angle (1MHz)	---	0.0002
Volume Resistivity	Ω.m	>10 ^15
Specific Heat	J/(kg·k)	0.78x10 ^3

Not without reason, the high temperature heating elements pellet igniter is the reliable standard ignition system for pellet heating systems in Europe-hundreds of satisfied customers speak for themselves.

 

RFQ

 

1.What's the max using temperature ?
Max 1700degree

2.Which composition suitable for metallized ceramics?
95%, 96% alumina

3.What's the 99 alumina's major applications?
Pump Shaft,Drive Shaft,Sealing Ring

4.Can you do OEM?
We are mostly doing by drawing

5.What's the delivery time?
About 20days

SEND ME
 

If you are interested in our products, please click here to send me an inquiry, and I will reply you within 8 hours