| Certification: | RoHS |
|---|---|
| Type: | Ceramic Parts |
| Material: | Alumina Ceramic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Wear resistance/ceramic insulator tube/for spark plugs isolators/igniter/innovacera
|
|
|
|
Introductions
|
Our ceramic igniters for wood pellets will not leave you cold! Ready to fit solution: High temperature heating element in
temperature-resistant ceramic socket Air can flow through and around inside and outside of heater Element temperature: 1,000 °C (1,850 °F) in permanent and alternating operation, for a short time up to 1,300 °C (2,350 °F) Lifetime up to 100,000 heating cycles, depending on operating conditions Completely electrically insulated towards the inside and outside; no exposed electrical contacts! Oxidation and corrosion-resistant Impervious to overheating: Blower failures/overheating is accepted without problem by ignition element. Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures - the ideal ignition blower! Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible. Protecting the ignition element from slagging can be guaranteed by means of a nozzle tip. |
|
|
Material performance
|
1.Material: Alumina
2.Maximum operation temperature :1000
3.Thermal conductivity (20): 18W/(m.K)
4.Specific heat (20):0.78×103 J/(kg.K)
5.Coef.of liner thermal expansion (40~800)
6.Vickers hardness (Load 500g):12.3 Gpa 3-point
7.flexural strength: 340 MPa
|
|
|
Product Specification
|
1.Part No.: 90105
2.Usage : Mainly applied to pellet stove
3.Working: Voltage: 220VAC
4.Wire:300-500mm
5.Dimension: Length: L90*φ10.5mm
6.Power:150-250W
|
|
|
Property
|
1.Excellent Mechanical Properties
2.High-Temperature Durability
3.Rapid Heat Up
4.High Efficiency Heat Exchange
5.Small Size/HighOutput
|
|
){kind=link}