| Certification: | RoHS, CE |
|---|---|
| Type: | Alumina Ceramic Tube Heater |
| Material: | Ceramic |
|
Still deciding? Get samples of US$ 19.9/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Alumina Ceramic Pellet Igniter consist of Al2O3 insulation ceramics with an integrated W conductor, and reach a permanent operation temperature of between 900°C and 1100°C.
| Usage | ignition |
| Working Voltage | 120V, 230VAC |
| Power | 160W 180W 210W 225W 230W 240W 255W 300W 350W |
| Dimension of product | Existing Sample: 78*Φ10.5*φ 6.5 m m, OD10.5*ID6.2*90MM, OD11.5*ID6.5*108MM |
| Holder Size: D17.5*35MM,OD24 * 45MM / OD25 * 35MM | |
| Customized sample is acceptable | |
| Lead wire: | 300mm / 400mm / 500mm / 900mm (Customized is accept) |
| Electrode | Welding leads on the electrode |
| Advantages | > Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket |
| > Air can flow through and around inside and outside of heater | |
| > Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C | |
| > Lifetime up to 100,000 heating cycles, depending on operating conditions | |
| > Oxidation and corrosion-resistant | |
| > Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures | |
| - the ideal ignition blower! | |
| > Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible. |
| Alumina Ceramic Heater Configuration and Dimensions | ||||
| Configuration | Dimension (mm) | |||
| Tube/Rod | Diameter/Length/width | Tolerance | Thickness | Tolerance |
| D:2.5~12 L:10~120 |
D:Above8+0.3,Below8+0.2 L:Above80+2.0,Below80+1.0 |
|||
| Square Plate | L: 10~100 W: 5-50 |
Above:70 +2 Below:70+1 |
0.5~2 | ±0.1 |
| Round plate | D:10~70 | Above:30 +2 Below:30+1 |
0.5~2 | ±0.1 |
|
||||
Please note that the above data only can be your reference.Different Structure would difference.(Especialy for the tolerance.
Alumina Ceramic Heater Design Structure
|
Thermal Properties for Alumina Heater
|
||
|
Item
|
Unit
|
Value
|
|
Vickers Hardness
|
Gpa
|
11.5
|
|
Flexural Strength
|
Mpa
|
300
|
|
Compressive Strength
|
Mpa
|
2000
|
|
Modulus of Elasticity
|
Gpa
|
300
|
|
Poisson's Ratio
|
---
|
0.22-0.23
|
|
Fracture Toughness
|
Mpam 1/2
|
3.5-4.0
|
|
Thermal Conductivity
|
W/(m·k)
|
25
|
|
Thermal Expansion Coefficient
|
10 -6/
|
6.5-7.5
|
|
Thermal Shock Resistance
|
△T
|
200
|
|
Maximum Use Temperature
|
|
1600
|
|
Dielectric Strength
|
KV/mm
|
>12
|
|
Dielectric Constant
|
εr
|
9-10
|
|
Dielectric Loss Angle (1MHz)
|
---
|
0.0002
|
|
Volume Resistivity
|
Ω.m
|
>10 15
|
|
Specific Heat
|
J/(kg·k)
|
0.78x10 3
|
){kind=link}